Glucose Oxidase Research Articles

A Biomineralized Bifunctional Patient-Friendly Nanosystem for Sustained Glucose Monitoring and Control in Diabetes.

Regular blood glucose monitoring and control is necessary for people with type 1 or advanced type 2 diabetes, yet diagnosing and treating patients with diabetes in an accurate, sustained and patient-friendly manner remains limited. Here, a glucose-responsive bifunctional nanosystem (PGOxMns) is constructed via one-pot biomineralisation of manganese dioxide with glucose oxidase and ε-poly-L-lysine. Under hyperglycaemic conditions, the cascade reactions that occur when glucose interacts with PGOxMns can trigger the production of Mn(II), which enhances the magnetic resonance imaging signal. Simultaneously, manganese dioxide catalyses the decomposition of toxic hydrogen peroxide into oxygen, which also maintains glucose oxidase (GOx)activity. In an in vivo model of diabetes, PGOxMns is used to monitor glucose levels (0-20mm) and allowed identification of diabetic mice via T1-weighted MRI. Furthermore, PGOxMns is found to have a high insulin-loading capacity (83.6%), likely due to its positive charge. A single subcutaneous injection of insulin-loaded nanosystem (Ins-PGOxMns) into diabetic mice resulted in a rapid and efficient response to a glucose challenge and prolonged blood glucose level control (< 200mgdL-1) for up to 50h. Overall, this proof-of-concept study demonstrates the feasibility of using biomineralised nanosystems to develop patient-friendly strategies for glucose monitoring and control.

Optimized Fabrication of Carbon-Fiber Microbiosensors for Codetection of Glucose and Dopamine in Brain Tissue.

Dopamine (DA) signaling is critically important in striatal function, and this metabolically demanding process is fueled largely by glucose. However, DA and glucose are typically studied independently and, as such, the precise relationship between DA release and glucose availability remains unclear. Fast-scan cyclic voltammetry (FSCV) is commonly coupled with carbon-fiber microelectrodes to study DA transients. These microelectrodes can be modified with glucose oxidase (GOx) to generate microbiosensors capable of simultaneously quantifying real-time and physiologically relevant fluctuations of glucose, a nonelectrochemically active substrate, and DA, which is readily oxidized and reduced at the electrode surface. A chitosan hydrogel can be electrodeposited to entrap the oxidase enzyme on the sensor surface for stable, sensitive, and selective codetection of glucose and DA using FSCV. This strategy can also be used to entrap lactate oxidase on the carbon-fiber surface for codetection of lactate and DA. However, these custom probes are individually fabricated by hand, and performance is variable. This study characterizes the physical nature of the hydrogel and its effects on the acquired electrochemical data in the detection of glucose (2.6 mM) and DA (1 μM). The results demonstrate that the electrodeposition of the hydrogel membrane is improved using a linear potential sweep rather than a direct step to the target potential. Electrochemical impedance spectroscopy data relate information on the physical nature of the electrode/solution interface to the electrochemical performance of bare and enzyme-modified carbon-fiber microelectrodes. The electrodeposition waveform and scan rate were characterized for optimal membrane formation and performance. Finally, codetection of both DA/glucose and DA/lactate was demonstrated in intact rat striatum using probes fabricated according to the optimized protocol. Overall, this work improves the reliable fabrication of carbon-fiber microbiosensors for codetection of DA and important energetic substrates that are locally delivered to the recording site to meet metabolic demand.

The Oxidase Mimicking Activity of MnOx NPs/Co3O4 NPs Hybrid Nanozyme for Glucose Oxidation

Herein, the hybrid nanozyme MnOx NPs/Co3O4 NPs on indium tin oxide coated glass substrate (ITO) was manufactured by imparting the porous morphology with its distinct merits: its surface valence states, oxygen vacancies, large surface area, and abundant active sites. The oxidase-like activity was investigated via the catalytic oxidation of chromogenic substrate in the presence of glucose visualized by the eyes. MnOx NPs containing Mn2+ and Mn3+ have a superior ability to oxidize glucose by reducing dissolved oxygen and producing H2O2. Co3O4 NPs, in turn, reduce H2O2 with concomitant 3,3′,5,5′-tetramethylbenzidine (TMB) oxidization. Thus, the nanozyme mimics the dual roles of glucose oxidase and peroxidase. The oxidase-like activity of hybrid nanozyme for glucose was found to be higher than those of single components. The nanozyme responded to glucose with a linear range from 60 µM to 1200 μM. The acceptable performance is probably due to the facilitated access of glucose to the proximity of the sensor surface. Good reproducibility was accomplished by virtue of the meticulous construction of NPs. Without functionalization and enzyme utilization, the fabricated nanozyme holds promise as a substitute for peroxidase and oxidase for detecting glucose.

Improvement of Hydrogen Peroxide and Glucose Detection in Serum using Persistent Luminescent Nanoparticles: Impact of Synthesis Parameters and Particle Size

In this study, we report the preparation of a library of nanoparticles doped with chromium (ZGO) through two distinct syntheses conducted at 120°C for 12 hours or 24 hours, followed by a calcination at 500°C or 750°C. Using centrifugation, and starting from polydisperse samples, we demonstrated the ability to achieve different sizes in a monodisperse manner. Furthermore, our research revealed that ZGO react differently with hydrogen peroxide (H2O2) based on their size, synthesis duration, and calcination temperature. We observed the most significant amplification of persistent luminescence for particles prepared at 120°C for 12 hours and calcinated at 500°C, with a size of 100 nm, in the presence of 100 mM H2O2. This study enabled the detection of H2O2 in serum, with a detection limit of up to 2.1 µM. Additionally, we designed a glucose test for based on the responsiveness of ZGO PLNPs to H2O2. Using glucose oxidase, the glucose detection limit in serum was established around 0.13 µM, with a detection range between 0 ‐ 5 µM. These findings could open new avenues to further control the size, synthesis, calcination temperature, and persistent luminescence of PLNPs, thus enhancing their utility in the development of new in vitro biosensors.

A Portable Paper Strip Biosensor -based Smartphone for Detection of Glucose Content in Rice Samples

A paper strip biosensor was fabricated through the combination of horseradish peroxidase and glucose oxidase with 4-aminoantipyrine and phenol in order to produce a pink color. The color intensity was measured with a smartphone for quantitative analysis. To achieve highest paper strip biosensor performance, the concentrations of glucose oxidase, horseradish peroxidase, phenol, 4-aminoantypyrine, pH, and reaction time were studied. Under optimizations, the linear range of the glucose was 0.5-10 mM, and the detection limit was 0.17 mM. The detection of glucose was achieved within 7 min. The paper strip biosensor was successfully applied to the measurement of glucose in rice samples. The paper strip biosensor exhibits considerable promise as a portable instrument for the detection of glucose in rice and is also applicable to other types of samples. This research, nevertheless, necessitates controlled experimental conditions. Due to the fact that it impacts enzymatic activity.

Relationships among Hydrogen Peroxide Concentration, Catalase, Glucose Oxidase, and Antimicrobial Activities of Honeys

Honey is a natural sweetener made by bees that exhibits antimicrobial activity, mainly related to its H2O2 content. The aim of this work was to research the H2O2 concentration of 24 Spanish honeys from different botanical origins, studying their possible correlation with glucose oxidase (GOx), catalase (CAT), and anti-Staphylococcus aureus activities (minimal inhibition concentration (MIC), minimal bactericidal concentration (MBC), and percentage of inhibition at 5% (w/v) honey against Staphylococcus aureus), as well as possible correlations among all the analyzed parameters. The results showed that the H2O2 concentration did not depend on the botanical origin of the honeys. There were neither correlations between the H2O2 concentration and the activities of GOx and CAT, nor between GOx and antimicrobial activity. However, CAT and antimicrobial activities were positively correlated. Therefore, CAT could be successfully used as a possible marker of the antimicrobial activity of honeys against Staphylococcus aureus. Furthermore, a linear regression model has been fitted to explain the antimicrobial activity from CAT and GOx activity and H2O2 concentration. Although H2O2 is one of the compounds involved in honey’s antibacterial activity, this capacity also strongly depends on other honey components (such as low water activity, acidity, osmolarity, and phenolic compounds). The very high anti-Staphylococcus aureus activity exhibited by all samples could be interesting for commercial honey-based formulations also helping to promote local beekeeping.

Enzyme-integrated metal-organic framework platform for cascade detection of α-amylase

As one of the most important industrial enzymes, α-amylase is widely used in food processing, such as starch sugar and fermentation, bringing high added value to industry of more than a trillion dollars. We developed a multi-enzyme system (Glu&Gox@Cu-MOF-74) prepared by embedding α-glucosidase (Glu) and glucose oxidase (Gox) into the biomimetic metal-organic framework Cu-MOF-74 using in situ encapsulation within 15 min at room temperature for efficient and sensitive detection of α-amylase activity. Benefitting from the remarkable peroxidase-mimicking property and rigid skeleton of Cu-MOF-74, the biocatalytic platform exhibited excellent cascade activity and tolerance in various extremely harsh environments compared to natural enzymes. On this basis, a cascade biocatalytic platform was constructed for the detection of α-amylase activity with wide linear range (5–100 U/L) and low limit of detection (1.45 U/L). The colorimetric cascade scheme is important for the sensitive and selective determination of α-amylase in complex fermentation samples, and the detection time is short (∼0.5 h). This work provides new ideas for the detection of α-amylase based on the cascade amplification method.

Temporal coordination of the transcription factor response to H2O2 stress

Oxidative stress from excess H2O2 activates transcription factors that restore redox balance and repair oxidative damage. Although many transcription factors are activated by H2O2, it is unclear whether they are activated at the same H2O2 concentration, or time. Dose-dependent activation is likely as oxidative stress is not a singular state and exhibits dose-dependent outcomes including cell-cycle arrest and cell death. Here, we show that transcription factor activation is both dose-dependent and coordinated over time. Low levels of H2O2 activate p53, NRF2 and JUN. Yet under high H2O2, these transcription factors are repressed, and FOXO1, NF-κB, and NFAT1 are activated. Time-lapse imaging revealed that the order in which these two groups of transcription factors are activated depends on whether H2O2 is administered acutely by bolus addition, or continuously through the glucose oxidase enzyme. Finally, we provide evidence that 2-Cys peroxiredoxins control which group of transcription factors are activated.

Tannic acid mediated hollow biocatalytic zeolitic imidazolate frameworks as a “three-in-one” label for enhancing the sensitivity of fluorescence immunosensor

Benefiting from the special structure feature, zeolitic imidazolate frameworks (ZIFs) have emerged as a carrier for enzyme immobilization. However, the sensitivity of the immunosensor with ZIFs needs further enhancement. Herein, a “three-in-one” label mediated by tannic acid (TA) was designed, demonstrating high enzyme activity, cascade signal amplification capability, and high coupling effectivity with antibodies. The acid property of TA was used as an etchant to etch ZIFs in situ for the generation of hollow ZIFs, which retained the conformational freedom of glucose oxidase for preserving their excellent catalytic activity. The TA on the surface of ZIFs coordinated Fe3+ ions through its phenol groups, forming metal polyphenol network films, which possessed peroxidase-like activity for cascade signal amplification. Meanwhile, the large amount of catechol groups of TA improved the coupling efficiency of antibodies. Based on the proposed “three-in-one” label, a novel fluorescence immunosensor was developed for the sensitive detection of Escherichia coli O157:H7. The limit of detection of the fluorescence immunosensor was 1.35 × 103 CFU mL−1 and 12.51-fold lower than that of traditional immunoassay. This proposed strategy provides a convenient method for preparing hollow ZIFs, facilitating the applications of ZIFs in the fields of biosensors.

A catalytic membrane approach as a way to obtain sweet and unsweet lactose-free milk.

The growing need in the current market for innovative solutions to obtain lactose-free (L-F) milk is caused by the annual increase in the prevalence of lactose intolerance inside as well as the newborn, children, and adults. Various configurations of enzymes can yield two distinct L-F products: sweet (β-galactosidase) and unsweet (β-galactosidase and glucose oxidase) L-F milk. In addition, the reduction of sweetness through glucose decomposition should be performed in a one-pot mode with catalase to eliminate product inhibition caused by H2O2. Both L-F products enjoy popularity among a rapidly expanding group of consumers. Although enzyme immobilization techniques are well known in industrial processes, new carriers and economic strategies are still being searched. Polymeric carriers, due to the variety of functional groups and non-toxicity, are attractive propositions for individual and co-immobilization of food enzymes. In the presented work, two strategies (with free and immobilized enzymes; β-galactosidase NOLA, glucose oxidase from Aspergillus niger, and catalase from Serratia sp.) for obtaining sweet and unsweet L-F milk under low-temperature conditions were proposed. For free enzymes, achieving the critical assumption, lactose hydrolysis and glucose decomposition occurred after 1 and 4.3h, respectively. The tested catalytic membranes were created on regenerated cellulose and polyamide. In both cases, the time required for lactose and glucose bioconversion was extended compared to free enzymes. However, these preparations could be reused for up to five (β-galactosidase) and ten cycles (glucose oxidase with catalase).

Etching of Ag nanoparticles triggered bidirectional regulation for electrochemiluminescence ratiometric immunoassay.

A highly efficient ratiometric electrochemiluminescence (ECL) immunoassay was explored by bidirectionally regulating the ECL intensity of two luminophors. The immunoassay was conducted in a split-type mode consisting of an ECL detection procedure and a sandwich immunoreaction. The ECL detection was executed using a dual-disk glassy carbon electrode modified with two potential-resolved luminophors (g-C3N4-Ag and Ru-MOF-Ag nanocomposites), and the sandwich immunoreaction using glucose oxidase (GOx)-modified SiO2 nanospheres as labels was carried out in a 96-well plate. The Ag nanoparticles (NPs) acted as bifunctional units both for triggering the resonance energy transfer (RET) with g-C3N4 and for accelerating the electron transfer rate of the Ru-MOF-Ag ECL reaction. When the H2O2 catalyzed by GOx in the 96-well plate was transferred to the dual-disk glass carbon electrode, the doped Ag NPs in the two luminophors could be etched, thus destroying the RET between C3N4 and the accelerated reaction to Ru-MOF, resulting in an opposite trend in the ECL signal outputted from the dual disks. Using the ratio of the two signals for quantification, the constructed immunosensor for a model target, i.e. myoglobin, exhibited a low detection limit of 4.7 × 10-14g/mL. The ingenious combination of ECL ratiometry, bifunctional Ag NPs, and a split-type strategy effectively reduces environmental and human errors, offering a more precise and sensitive analysis for complex samples.

Bioelectrochemical Sensing Using Benchtop Fabricated Nanoroughened Microstructured Electrodes

AbstractCost‐effective miniaturized electrodes that maintain a high electroactive surface area (ESA) are needed for the widespread deployment of point‐of‐care sensors. Cost‐effective methods are recently developed to fabricate nanoroughened microstructured gold electrodes (NR‐MSEs) with ultrahigh ESA. In this work, the effectiveness of NR‐MSEs for bioelectrochemical enzymatic sensors is evaluated. A glucose sensor is constructed by first casting onto NR‐MSEs a solution containing reduced graphene oxide decorated with gold nanoparticles, glucose oxidase, and glutaraldehyde, followed by a solution containing ferrocene, and a layer of chitosan to prevent the leakage of sensor components. A urea biosensor is also fabricated using Nafion as a cationic exchanger for the electropolymerization of polyaniline, followed by the deposition of a composite containing urease, bovine serum albumin, and glutaraldehyde. The limit of quantification for both biosensors is below clinically relevant concentrations of the analytes in biofluids, 0.67 mm for glucose and 1.70 mm for urea. The sensors exhibit excellent performance in complex matrixes (human blood serum and wine for glucose and human blood serum and urine for urea), with recovery for spiked analytes in the range of 92–108%. It is anticipated that NR‐MSEs will expedite the development of highly sensitive bioelectrochemical sensors for use in resource‐limited settings.

Magnetic Nanoparticle Support with an Ultra-Thin Chitosan Layer Preserves the Catalytic Activity of the Immobilized Glucose Oxidase.

Here, we developed magnetically recoverable biocatalysts based on magnetite nanoparticles coated with an ultra-thin layer (about 0.9 nm) of chitosan (CS) ionically cross-linked by sodium tripolyphosphate (TPP). Excessive CS amounts were removed by multiple washings combined with magnetic separation. Glucose oxidase (GOx) was attached to the magnetic support via the interaction with N-hydroxysuccinimide (NHS) in the presence of carbodiimide (EDC) leading to a covalent amide bond. These steps result in the formation of the biocatalyst for D-glucose oxidation to D-gluconic acid to be used in the preparation of pharmaceuticals due to the benign character of the biocatalyst components. To choose the catalyst with the best catalytic performance, the amounts of CS, TPP, NHS, EDC, and GOx were varied. The optimal biocatalyst allowed for 100% relative catalytic activity. The immobilization of GOx and the magnetic character of the support prevents GOx and biocatalyst loss and allows for repeated use.

Core@paratroopers Nanoassemblies with Catalytic Cascade for Efficient Tumor Starvation Therapy

AbstractThe catalytic therapy based on the nanozymes has received increasing interest in cancer treatment. However, the catalytic capabilities of standalone nanozymes are relatively limited, necessitating the development of a nano‐bio composite system that integrates both nanozymes and natural enzymes. This construction often inevitably leads to interference between natural enzyme and nanozymes, resulting in reduced synergistic performance. Herein, a cascade catalysis system featuring the “core@paratroopers” structure is proposed, wherein hollow manganese dioxide (HMnO2) serves as “core” and ultra‐small hybrid single‐micelle (H‐micelle) encapsulated with glucose oxidase (GOx) as “paratroopers” (H‐micelle‐GOx). The outer SiO2 layer of the H‐micelle can effectively protect the GOx. Under hypoxic conditions, HMnO2 reacts with endogenous H2O2 to produce O2, thereby enhancing the catalytic efficiency of GOx for starvation therapy. Simultaneously, the generated H2O2 boosts the catalytic efficiency of HMnO2, accelerating local O2 generation and alleviating tumor hypoxia. Additionally, this system exhibits rapid degradation in the tumor microenvironment characterized by high glutathione (GSH) expression, facilitating the release and deep penetration of the ultra‐small H‐micelle‐GOx “paratroopers” within the solid tumor.

The potential of glucosidase and glucose oxidase for aroma improvement in concentrated peach puree based on volatilomics and metabolomics

Cooked off-flavor was produced during the processing of concentrated peach puree (CPP), which led to aroma deterioration. Enzymatic treatment was beneficial in eliminating off-flavors and improving the aroma quality. Herein, the efficacy of glycosidase (AR2000), glucose oxidation (GOD), and their combination on the inhibition of off-flavors and aroma enhancement were evaluated. Compared with CPP, contents of benzaldehyde, benzyl alcohol, nonanal, and linalool increased by 198%, 1222%, 781%, and 71% after AR2000 treatment via the metabolisms of shikimate, glucose, linoleic acid, and linolenic acid, leading to the strengthening of floral and grassy. Due to the removal of 1-octen-3-one via linolenic acid metabolism, cooked off-flavor could be significantly weakened by GOD. Furthermore, Furthermore, the combination of AR2000 and GOD could not only inhibit the production of 1-octen-3-one to weaken the cooked note but also enhance grassy and floral attributes via the increase of aldehydes and alcohols.

Intensification of a biocatalytic oxidation under fine bubble aeration in a rotating bed reactor

The utilization of oxidases suffers from insufficient oxygen availability due to its low solubility in gas-liquid multiphase systems. To overcome this limitation, oxygen is continuously supplied to the reaction medium during the course of the reaction, however, it causes significant gas consumption. In this study, a novel experimental set-up was established by installing a sintered frit porous sparger in the SpinChem® rotating bed reactor. Covalently immobilized glucose oxidase on epoxy-functionalized carriers was used in the rotating bed reactor with an activity yield of the immobilization of over 98%. For fine bubble aeration, the volumetric mass transfer coefficient kLa (67.3 h−1) tripled compared to macrobubble aeration (22.5 h−1), while the volume-specific aeration rate remained constant. A maximum reaction yield of 96.5% was reached. The reaction rate was improved by a factor of 12.9 for the fine bubble aeration compared to macrobubble aeration under identical conditions. With fine bubble aeration, the oxygen consumption was reduced by 87.5% over macrobubble aeration, establishing the same enzyme-specific reaction rates at a comparable kLa. Validation was carried out in repetitive batches, achieving the same glucose oxidase specific activity. This study demonstrates the advantages of fine bubble aeration and presents promising results for addressing the sustainable biotransformation processes.

Metabolic Regulation-Mediated Reversion of the Tumor Immunosuppressive Microenvironment for Potentiating Cooperative Metabolic Therapy and Immunotherapy.

Tumor cells exhibit heightened glucose (Glu) consumption and increased lactic acid (LA) production, resulting in the formation of an immunosuppressive tumor microenvironment (TME) that facilitates malignant proliferation and metastasis. In this study, we meticulously engineer an antitumor nanoplatform, denoted as ZLGCR, by incorporating glucose oxidase, LA oxidase, and CpG oligodeoxynucleotide into zeolitic imidazolate framework-8 that is camouflaged with a red blood cell membrane. Significantly, ZLGCR-mediated consumption of Glu and LA not only amplifies the effectiveness of metabolic therapy but also reverses the immunosuppressive TME, thereby enhancing the therapeutic outcomes of CpG-mediated antitumor immunotherapy. It is particularly important that the synergistic effect of metabolic therapy and immunotherapy is further augmented when combined with immune checkpoint blockade therapy. Consequently, this engineered antitumor nanoplatform will achieve a cooperative tumor-suppressive outcome through the modulation of metabolism and immune responses within the TME.

Antidiabetic Close Loop Based on Wearable DNA-Hydrogel Glucometer and Implantable Optogenetic Cells.

Diabetes mellitus and its associated secondary complications have become a pressing global healthcare issue. The current integrated theranostic plan involves a glucometer-tandem pump. However, external condition-responsive insulin delivery systems utilizing rigid glucose sensors pose challenges in on-demand, long-term insulin administration. To overcome these challenges, we present a novel model of antidiabetic management based on printable metallo-nucleotide hydrogels and optogenetic engineering. The conductive hydrogels were self-assembled by bioorthogonal chemistry using oligonucleotides, carbon nanotubes, and glucose oxidase, enabling continuous glucose monitoring in a broad range (0.5-40 mM). The optogenetically engineered cells were enabled glucose regulation in type I diabetic mice via a far-red light-induced transgenic expression of insulin with a month-long avidity. Combining with a microchip-integrated microneedle patch, a prototyped close-loop system was constructed. The glucose levels detected by the sensor were received and converted by a wireless controller to modulate far-infrared light, thereby achieving on-demand insulin expression for several weeks. This study sheds new light on developing next-generation diagnostic and therapy systems for personalized and digitalized precision medicine.

Injectable Hydrogel Based on Enzymatic Initiation of Keratin Methacrylate for Controlled Exosome Release in Intervertebral Disc Degeneration Therapy

AbstractThe treatment of intervertebral disc degeneration (IVDD) using bone marrow mesenchymal stem cell‐derived exosomes has shown success in alleviating inflammation and restoring the extracellular matrix (ECM), however, challenges persist due to the deficiency in mechanical support and controlled release. Herein, a carbon‐carbon double bond modified keratin (KeMA) is synthesized by 2‐isocyanatoethyl modification for exosomes wrapping. This injectable KeMA hydrogel, initiated by a biocompatible glucose/ glucose oxidase/ horse radish peroxidase enzymatic cascade reaction with acetylacetone and N‐vinylpyrrolidone, displayed rapid gelation, resembling nucleus pulposus (NP) elasticity, and excellent cytocompatibility. In vitro studies showcased that the exosomes‐loaded KeMA hydrogel (Exo@KeMA) enhanced exosome release kinetics, suppressed inflammation, fostered extracellular matrix (ECM) regeneration, and reinstated NP biomechanics. RNA‐seq analysis indicated Exo@KeMA's effects involved PI3K‐Akt signaling for matrix regeneration and NF‐κB signaling inhibition for anti‐inflammation. In vivo IVDD rat models demonstrated Exo@KeMA attenuated inflammation, maintained NP water content, preserved disc height, and promoted structural regeneration. This research introduces an injectable KeMA hydrogel as a promising therapy for IVDD, by facilitating biomechanics restoration, anti‐inflammatory response, and ECM regeneration.

A graphene oxide-modified biosensor for non-invasive glucose monitoring in college athletes

The study aims to address the need for accurate and real-time monitoring of glucose levels in college athletes during physical activities. This work reports on the development of an electrochemical sensor that uses glucose oxidase (GOx) immobilized on PdO nanoparticles to reduce graphene oxide (rGO) nanocomposite printed on a cellulose substrate (GOx/PdO-rGO/C-PE). The successful reduction of GO to rGO, the production of the PdO-rGO nanocomposite, and the electropolymerization of GOx on the PdO-rGO nanocomposite were all validated by the material characterization. The biosensor's electrochemical response investigation showed that its detection limit was 0.046 μM and its sensitivity was 0.03239 μA/μM. Excellent stability, reproducibility, and glucose selectivity were shown by the GOx/PdO-rGO/C-PE, which makes it a viable option for consistent and dependable glucose sensing in real-world applications. The real sample analysis assessed how well the combination of GOx/PdO-rGO/C-PE could identify glucose in human serum. Furthermore, under a variety of real-world conditions, such as during various physical activities and at different times of the day, the sensor demonstrated outstanding performance in real-time glucose monitoring. These findings imply that the GOx/PdO-rGO/C-PE offers accurate and dependable readings in the field of non-invasive glucose monitoring, which will be especially helpful for college and professional athletes.